Fast delivery within 72 Hours
Κοτσαδόρος για το Νέο Wrangler JK
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Specification
Overview
Processor
Display
RAM
Storage
Video Card
Connectivity
Features
Battery
General
Description
Κοτσαδόρος για το Νέο Wrangler JK
Jeep® JK Wrangler Receiver Hitch
| Contents: 1. Receiver Weldment (1) 2. Mounting Bolts (4) 3. Nylock Nuts (4) 4. Flat Washers (8) Tow Rating: 2 DR JK (Up to 2000lbs) DO NOT EXCEED THE MANUFACTURER’S STATED TOW RATING FOR EACH MODEL. READ OWNERS’ MANUAL BEFORE INSTALLING. |
Caution – The Receiver Hitch installs very close to the muffler.
Ensure that the vehicle is cool before attempting to install.
| 1. If your vehicle is equipped with a tow hook, it must first be removed from the vehicle. There are 3 bolts holding the rear tow hook to the rear cross member. These must be removed, and the tow hook slid down off the cross member. |
| 2. Slide the receiver over the rear crossmember, taking care to align the 4 holes in the receiver with the 4 holes in the cross member. Once in place, insert the left or right-most bolt with a flat washer into the back side of the hitch and through the cross member. Place the nylock nut and flat washer onto the bolt. Secure but do not tighten. |
| 3. Once all 4 bolts and nylock nuts have been started, tighten them. The nuts will need to be held in place with an open-end wrench during this step. |
| 4. Insert the trailer wiring, if equipped, into the trailer wiring mounting tab on the receiver as shown. Installation is now complete.
PLEASE NOTE: This hitch is designed to tow up to 2000 lbs 2 door and 3500 lbs 4 door. |
Congratulations on the purchase and installation of a quality Rugged Ridge Product.
